Tag Archives: Cannonlake

Even though Intel Corp. has been gradually increasing the number of general-purpose processing engines inside its microprocessors for servers, the company’s high-end chips for client PCs feature no more than eight x86 cores, whereas mainstream central processing units sport up to four cores. Apparently, Intel has no plans to change …

Intel Corp. has implied a number of times that it did not need to use extreme ultraviolet lithography for its 7nm manufacturing process. However, after facing problems with multi-patterning methods at 14nm and 10nm fabrication technologies, it seems that the company has changed its mind. This week Intel said that …

Intel Corp. on Wednesday confirmed the delay of mass production of central processing units using 10nm fabrication process to 2017. The company said that it ran into difficulties with its 10nm technology and decided to stretch the life-cycle of 14nm process with one more family of CPU products code-named “Kaby …

Intel Corp.’s “Kaby Lake” central processing units will be released exactly a year after the company’s “Skylake” chips due this August and September. The introduction of chips in late third quarter means that the company will further postpone the roll-out of microprocessors made using 10nm fabrication process. As reported, Intel’s …

Intel Corp. has again delayed installation of equipment necessary to produce semiconductors in high volume using 10nm process technology. It is believed that Intel experiences yield ramp issues, just like in case of its 14nm manufacturing tech, which is why it does not make sense for the company to buy …

Intel Corp. has changed its roadmap once again and delayed its code-named “Cannonlake” processors to an unknown date. Next year the company will introduce “Kaby Lake” processors made using 14nm FinFET process technology. Intel’s “Kaby Lake” processors will feature two or four cores, a new generation integrated graphics engine, a …

Intel Corp. has been particularly tight-lipped about its roadmap concerning microprocessors to be made using 10nm fabrication process. However, on Friday the company said that development of the 10nm technology is progressing well and it will share more information about products it plans to produce using the process later this year. …

Intel Corp. will speed up development and launch of its future-generation code-named “Cannonlake” processors, if an alleged slide from the company’s roadmap is genuine. The first chips to be made using 10nm process technology may hit the market as early as in the middle of next year, but they will …

Intel Corp. is confident that its 10nm manufacturing process will enable it to build central processing units cost-efficiently. However, the company does not want to reveal when exactly it plans to start making chips using its next-generation 10nm fabrication technology. In accordance with Moore’s law and Intel's tick-tock cadence, the company needs to …

It is not a secret that transitions to newer chip manufacturing processes are getting more difficult from financial capital standpoint since not only research and development costs more than before, but also production equipment is getting more expensive. In a bid to keep their prices at current levels, semiconductor companies need …

Intel Corp. delayed mass production of 14nm chips by nearly a year because of insufficient yields. According to a media report, something similar may happen to its 10nm manufacturing technology. Intel is setting up a small pilot line for 10nm production in D1X development fab in Hillsboro, Oregon, reports SemiconductorEngineering. …

Intel Corp.’s forthcoming central processing units code-named “Skylake” for personal computers will not support any AVX-512 instructions, according to a media report. Only Xeon processors for servers and, possibly, workstations will support 512-bit instructions. Support of 512-bit SIMD instructions – known as AVX3 – was expected to be a key …

The needs of modern cloud datacenters require developers of microprocessors to implement certain custom functionality into their products. As reported, Intel Corp. has incorporated multiple special-purpose technologies into its latest Xeon platform and offers optimized versions of CPUs to select customers. However, the company still does not offer chips that …

While Intel Corp. has confirmed development of 10nm fabrication process as well as appropriate microprocessors, the company has never revealed exactly when it plans to introduce chips that will succeed its next-generation code-named “Skylake” CPUs. A couple of weeks ago a representative for Intel finally said that its first 10nm …

A leading professional overclocker has managed to set a new DDR4 clock-rate record using hardware from MicroStar Interational, Kingston and Intel Corp. While overclocking results of contemporary DDR4 memory modules are impressive, when it comes to actual frequency, they are considerably behind DDR3 memory solutions. Toppc, one of the world’s …

Intel Corp. said on Tuesday that it would be the first company to start volume production of chips using 10nm fabrication technology. The company has already demonstrated the first wafers processed using 10nm tech, now it revealed that it will gradually increase its investments in the forthcoming technology in the coming …

Although Intel Corp. is behind the schedule with its 14nm manufacturing process, the company claims it has not made any changes to its 10nm schedule. Unfortunately, Intel has not officially revealed exact plans regarding production of chips using 10nm process technology. “We have done no changes or shift to our …

A web-site has published the first details regarding Intel 100-series chipsets that will power personal computers based on the code-named Skylake microprocessors. As expected, Intel’s next-generation core-logic sets will support SATA Express as well as some other innovations. What is interesting is that the new chipsets will also support enhanced …

In a bid to convince its partners and investors that it is on-track with its Tick-Tock strategy, Intel Corp. reportedly plans to showcase several yet-unannounced products at the Intel Developer Forum event this September. While the company will demonstrate certain new things, it does not mean that everything goes truly …

In the recent years Intel Corp. has been consistently reducing power consumption of its chips using different methods. The company not only developed very efficient low-power micro-architectures (such as the Silvermont), but it also managed to design special versions of its processors based on high-performance micro-architectures with extremely low power …

The PCI Express technology has served as the main standard for PC and server expansion slots for exactly ten years now and will probably be used for many years to come. Members of the PCI SIG [special interest group] reportedly agreed to double the bandwidth of the PCI Express 4.0 …

At the Computex 2014 trade-show Intel Corp. announced that its reference designs based on the Skylake generation of microprocessors will support Rezence, a wireless charging standard developed by the Alliance 4 Wireless Power (A4WP). This week Intel actually licensed wireless charging solutions for computing devices designed by WiTricity. The A4WP’s …

A desktop platform roadmap that Intel Corp. had reportedly demonstrated at a conference in Italy has been published by an unofficial source. A slide from the roadmap confirms that Intel intends to release both code-named “Broadwell” and “Skylake” microprocessors for desktops next year. In addition, the company intends to release …

Intel Corp. has been consistently improving performance of its integrated graphics cores for several years now and the code-named Skylake family of microprocessors will not be an exception. According to an unofficial media report, the Skylake will bring a rather dramatic improvement in terms of graphics processing performance compared to …

Xi3 Corp., a company that is mostly known for its small form-factor (SFF) Piston systems and its partnership with Valve Software, and Intel Corp. on Monday said that they would jointly work on next-generation mini personal computers. Xi3 also revealed plans to sell Intel’s NUC SFF systems. It is unclear …

The upcoming systems powered by the Core M “Broadwell” microprocessors will certainly be impressive. But the real revolution awaits us sometimes in 2015 – 2016, when Intel Corp.’s partners roll-out devices based on the code-named “Skylake” central processing units. Those mobile systems are expected to be completely wireless and therefore …

While Intel Corp. has officially promised to release its next-generation Skylake microprocessors in the second half of next year, a new market rumour suggests that the company may unveil its first central processing units based on the Skylake micro-architecture already in the second quarter of 2015. A new version of …

As previously reported, despite of the delay of the code-named Broadwell lineup of central processing units, Intel Corp.’s code-named Skylake chips are on-track to be introduced in 2015. Since preparations for introduction of the new platform are already underway in south-east Asia, the first leaks about the Skylake and systems …

Intel Corp. said this week that despite the delay that occurred to mass production of the code-named Broadwell microprocessor, the company is on-track to start manufacturing of chips based on the all-new next-generation micro-architecture known as Skylake in 2015. “We have a lot going on, the ramp of Broadwell, the …