Home / Tech News / Featured Announcement / AWD Ignis Aqua 290X 250D Mini ITX PC Review

AWD Ignis Aqua 290X 250D Mini ITX PC Review

Rating: 7.5.

If you are in the market for a compact, yet powerful, watercooled system – but don't want to build it yourself, then today's review may just tickle the taste buds. The AWD Ignis Aqua 290X 250D Mini ITX PC is built around a Core i5 4670k processor – overclocked to 4ghz. Graphics are handled by the very capable AMD R9 290X, which is also supplied in a heavily overclocked state. The whole system is watercooled with XSPC kit … featuring ‘blood red' fluid. Is it all worth the £1,499 asking price?

first page
It is not often we get a prebuilt system which is completely watercooled. AWD-IT have decided to ditch the use of a simple ‘All-In-One' liquid cooler and have opted to go with a custom XPSC watercooling kit handling both processor and graphics card. All of this has been installed inside the diminutive Corsair 250D Mini ITX chassis.

System Specification

  • Case: Corsair 250D Mini ITX
  • Power Supply: XFX XTR 650W Gold Certified Power Supply
  • CPU: Intel Core I5 4670K Overclocked @ 4.0Ghz (Liquid Cooled with XSPC Raystorm)
  • Motherboard: Gigabyte Z87N-Wifi Motherboard
  • RAM: 8GB DDR3 2400MHz Dual Channel Kit
  • Hard Drive: Seagate 1TB 7200RPM Hard Drive
  • SSD – Samsung 840 EVO 120GB Solid State Drive
  • Graphics Card: Radeon R9 290X (Liquid Cooled with R9 290x Block)
  • Sound: Realtek 7.1 High Definition Channel Sound (On-Board)
  • Optical Drive: N/A
  • Cooling: Custom XSPC Watercooling

Retail price: £1,499.99 inc vat.

Become a Patron!

Check Also

The latest AOC AGON monitor boasts a whopping 520Hz refresh rate

AGON by AOC is raising the bar again with its latest creation: the AGON Pro AG276FK. This 27-inch Full HD gaming monitor boasts a Fast IPS panel and an astonishing refresh rate of 520Hz, making it one of the first monitors with these specs to be released.

2 comments

  1. That big bubble tho…

  2. I think with the size (or lack there of) of this build; I’d be using 3/8″ tubing, to make sure there’s no chance of kinks forming along some of those tight bends.
    Also; it looks to have a DDC pump, if that’s the case, how much airflow is it actually going to get before it overheats in that little corner of the chassis?

    I do like the fact that the system comes with a custom loop instead of one of those (awful) AIO systems.