Home / Component / Memory / SK Hynix to mass produce 128GB DDR4 memory modules in Q4 2015

SK Hynix to mass produce 128GB DDR4 memory modules in Q4 2015

SK Hynix has notified its partners regarding availability of its high-capacity DDR4 memory modules for servers. A good news is that the company will improve performance of such memory solutions, however, a not very good news is that the firm will delay mass production of its flagship 128GB LRDIMM by a couple of quarters.

Last year SK Hynix introduced 16GB, 32GB, 64GB and 128GB DDR4 load-reduced memory modules for servers. The devices are based on 8Gb DDR4 DRAM devices made using 20nm process technology (vertically stacked into 4 Hi-stack high-density DRAM chips using through-silicon-via technology) and have VDD voltage of 1.2V.

sk_hynix_128GB_DDR4_module
128GB DDR4 DIMM developed by SK Hynix. Images by Yonhap News, Myce.com

Originally SK Hynix planned to rate its high-density memory modules to run at 2133MHz (with CL15 15-15 latency settings), but now the company also plans 2400MHz (with CL17 17-17 timings) memory modules with up to 128GB capacity, which will help to increase memory bandwidth (by about 12 per cent) inside modern servers powered by DDR4, which will boost their performance and will improve performance-per-watt.

SK Hynix plans to start mass production of 16GB, 32GB and 64 GB DDR4 memory modules for servers in the second quarter of 2015, just like it planned last year. However, 128GB DDR4 memory solutions rated to run at 2.13GHz or 2.40GHz will become available only in Q4 2015, according to a document seen by KitGuru.

sk_hynix_128GB_DDR4_module_1
128GB DDR4 DIMM developed by SK Hynix. Images by Yonhap News, Myce.com

By the fourth quarter of 2014 DDR4 memory will gain a significant share of the server market. In fact, it is projected that the DDR4 will become the mostly used memory standard sometimes in 2016. As a result, demand for 128GB modules will likely be relatively strong as large enterprises adopt high-end multi-core server processors and high-capacity modules. Still, do not expect mass or mainstream servers to adopt such modules for quite a while.

sk_hynix_128gb_trends

SK Hynix did not comment on the news-story.

Discuss on our Facebook page, HERE.

KitGuru Says: At present it is impossible to get 64GB DDR4 memory modules from anyone but Samsung Electronics (even if they are sold by different brands, they are made by Samsung). Therefore, when SK Hynix starts mass production of its high-capacity DDR4 DRAM solutions in the second quarter, prices of such products will get a little lower.

Become a Patron!

Check Also

G.Skill and Asus break DDR5 memory overclocking record

G.Skill Trident Z5 memory, combined with an Asus Z890 ROG Apex motherboard sets new world record for DDR5 memory speed, surpassing 12,112MT/s.

7 comments

  1. “By the fourth quarter of 2014 DDR4 memory will gain a significant share of the server market” might want to correct that.

  2. Søren Chr. Nielsen

    would a stick like one of those fit into a “normal” DDR4 RAM slot and if it does, would it work in a normal desktop pc as RAM?

  3. Yea, but you’d probably have to sell your kidney for a stick.

  4. Søren Chr. Nielsen

    That’s okay, I’ve got two kidneys. 😉

  5. for reference Mushkin Proline 16GB (2x 8GB Kit) PC2-5300 ECC Registered 240-pin DIMM is 881 AUD, so you are looking at well over a grand.

    your kidney is worth 5 grand so your good http://www.havocscope.com/black-market-prices/organs-kidneys/

    https://www.ramcity.com.au/buy/mushkin-proline-16gb-2x-8gb-kit-pc2-5300-ecc-regis/2×991928

  6. Only if your motherboard supports that much memory.

  7. me too, dont know what it means: 2014 and “will” ?