Home / Component / Graphics / EVGA GeForce GTX 980 hits 2.30GHz, sets new records

EVGA GeForce GTX 980 hits 2.30GHz, sets new records

Nvidia Corp.’s code-named GM204 graphics processing unit has once again managed to set a new frequency record for graphics processing units. A well-known overclocker has succeeded in pushing the frequency of the GPU to 2.30GHz clock-rate, but could not eventually replicate the record because of high humidity.

Steponz, a leading overclocker from the U.S., has overclocked his EVGA GeForce GTX 980 Classified ACX 2.0 4GB graphics card to 2300MHz for the GPU and 8712MHz (2178MHz*4) for GDDR5 memory. The GM204 GPU voltage (VDDC) was increased to whopping 1.212V and the graphics board was cooled down using liquid nitrogen (LN2). When later he tried to push the clock-rate to 2.30GHz, the test system malfunctioned because of high humidity.

steponz_evga_overclocking_ln2_nitrogen_geforce_gtx_980_1

“Had 2300/2200, but last three seconds setup went bad,” said Steponz in his comments over at Hwbot.org. “Really bad humidity here today. Going to play tomorrow too. […] If they humidity wasn't so bad, 2300MHz would have been there, just so much water everywhere and in the pot.”

steponz_evga_geforce_overclock_extreme_image_id_1345017

Using his test bed powered by an Intel Core i7-5960X processor clocked at 5.815GHz (also cooled-down using liquid nitrogen), a Gigabyte X99 SOC Champion mainboard and 16GB of 3.10GHz DDR4 memory, Steponz scored 10459 points in 3DMark FireStrike Extreme (using the graphics board functioning at 2.30GHz/8712MHz), which is the world’s new record for a single-GPU setup. He also scored 48193 points in Catzilla 720p benchmark (using the card operating at 2278/8812MHz), the highest result for a single-GPU system ever achieved.

evga_geforce_gtx_980_classified_3

Steponz specifically mentioned that the EVGA GeForce GTX 980 Classified ACX 2.0 4GB was a “monster card” thanks to massive amount of enhancements designed to improve overclocking potential. Nearly half of a year after the release of the board, overclockers still manage to set new records using this graphics adapter and push the GM204 to its limits.

Discuss on our Facebook page, HERE.

KitGuru Says: With the “regular” EVGA GeForce GTX 980 Classified hitting 2.30GHz on GPU, it is now even more interesting to see what the improved version of the graphics adapter – the EVGA GeForce GTX 980 Kingpin Edition – can do. Will we see GM204 hitting 2.40GHz?

Become a Patron!

Check Also

Leaker claims Nvidia RTX 5070 Ti will pack 8,960 CUDA cores

Leaker Kopite7kimi, known for accurate Nvidia leaks, claims that a GeForce RTX 5070 Ti is in the works and could launch alongside the RTX 5080 at CES.

10 comments

  1. A record broken, a nvidia graphics card? Fist picture tells us the truth. Liquid Nitrogen.

  2. Do you think that it is the way that it is meant to be played?

  3. Am I the only one who noticed the tonnes of screenshots in the background XD

  4. Humidity….. If they really wanted to break ground they should have been in an environmentally sealed room deprived of humidity by dehumidifying the air, then done their record breaking tests… Come on now…

  5. Since when is 1.212v “whopping”? That is the max that any reference NV card can do,Classifieds can volt WAAYYYYYYY higher(1.5v+)

  6. That’s how all record-breaking runs are cooled…

  7. seriously even running a ac on dry mode would be enough

  8. Pretty sad isn’t it?

  9. No? Even RAM is LN2-cooled to record runs. Everything is liquid nitrogen or even liquid helium cooled when you are going for world records, be it AMD, NVidia, Intel, etc.

  10. Yeah. Its sad. take away that one thing which isn’t practical and you’re stuffed.