KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
The ATTO Disk Benchmark performance measurement tool is compatible with Microsoft Windows. Measure your storage systems performance with various transfer sizes and test lengths for reads and writes. Several options are available to customize your performance measurement including queue depth, overlapped I/O and even a comparison mode with the option to run continuously. Use ATTO Disk Benchmark to test any manufacturers RAID controllers, storage controllers, host adapters, hard drives and SSD drives and notice that ATTO products will consistently provide the highest level of performance to your storage.
The Plextor M6e PCI Express 512GB SSD scores right at the top of our chart, peaking at 770 MB/s read and 690 MB/s write. Write performance is actually better than Plextor's 625 MB/s claims for the 512GB drive.
Some comparison results from other leading products available on the market today.
Well I am glad to see this, I had a revodrive for 4 months and it was the most unreliable piece of crap I have ever owned. OCZ went out of business for a reason 🙁 This seems well priced too. watching for a store link!
Its a good price really, If you want this performance you need to RAID 0 two budget 256GB drives, lose 2 SATA ports – which I would rather have for my mechanical storage drives. I like it.
The article states the test was performed on an Asus P8P67 Deluxe motherboard, but the one depicted is a Maximums VI. Could you clarify which platform it was?
Apologies John, there was a paragraph of text which should not have been there on the methodology page. it was tested on the Maximus, the Kitguru Test rig, which is sold by PCSPECIALIST. (same as the image shown).
Thanks for the super-speedy answer Zardon, and for the clarification. Was wondering if an older platform would constrain the performance or distort possible expected performance for end users, glad to see that was not the case. Much appreciated.
Apologies for what might be a silly question, would it be worth it price-wise if I got a low end SSD and held out for SATA Express or got one of these and kept it for a while after SATA Express came out, would it be worth it and would the performance be okay even after?
Hi Richard, it all depends on how much you want to spend. A low end SSD right now is very inexpensive, whereas this M6e will be more expensive. As we said, the M6e is faster than any SSD you can get right now, due to limitations of the SATA interface. To be honest however, most people would be happy with a standard, cost effective SSD running via a SATA 6Gbps port.
I’m bottlenecking at the moment on a mechanical hard drive, I think I’ll get a mid range SSD and wait for SATA Express but maybe something will happen through the year. Thanks for the fast response 🙂