KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
Crystalmark is a useful benchmark to measure theoretical performance levels of hard drives and SSD’s. We are using V3.0 x64.
The fastest results we have seen, even without enabling the 0x00 fill option.
Overall performance is as we would hope, class leading. We then retested with the alternative ‘compressible’ setting called 0×00 fill.
Staggering results, achieving over 1200MB/s in the write test. 4k QD32 performance is easily the highest we have seen, with no other drive even getting close.
Sequential read and write performance is way out in front, delivering more than twice the performance of the leading SATA 3 interface drives with a single SF2281 controller. Just check out the 4k QD32 write performance!
Its a lot of money for a drive (or card in this case, whatever its classed as), but for the high end audience this would rock. especially for video editing and streaming of HD content. I would guess that tv studios would use these a lot.
they don’t worth the money yet, way too expensive, not reliable, i better with two Raptors.
I dont think this is meant as a mainstream solution. I cant ever see the need for this myself.
A 120gb SATA 3 drive is more than enough for the mainstream audience, or even the high end audience, but this is a heck of a showcase for OCZ.
Why do you say unreliable 63jax?? have there been reports?
I heard the last ones had a fairly high failure rate. read a thread on it (think it might have been OCZ’s forum).
Hadnt read anything about these. quitre a few reviews up already for the 3 series and everyone seems to say they are ass kicking everything else.
Yeah, very nice. but id expect a new gaming laptop for the same price. PRO market product. scary speeds !
and relating to the numerous and infamous BSOD and freezes found with the new Sandforce controllers?
Are these drives failing too? or was that older ones? I dont think OCZ had a huge issue with 2281 failures. I think this was all sorted out a while ago….
i meant the SSDs in general are not reliable, OCZ has the highest return rate from them all, the safest right now are Intel’s drives, kinda…
i personally will wait a bit longer to refine them.
Just a note to say that running check disk on a revodrive is a bad idea. It is OK to run check disk switch free but I lost 40 GB to bad secotrs when I attempted to run checkdisk with the “b” switch. ie.e “check for recover bad sectors”.