We measure from a distance of around 1 meter from the closed chassis and 4 foot from the ground to mirror a real world situation. Ambient noise in the room measures close to the limits of our sound meter at 30dBa.
The minimum readings for our acoustics tests are obtained with the fans running at 5V. For our maximum readings the fans were left running at 12V. The CPU and GPU fans are manually disconnected to eliminate unwanted noise.
KitGuru noise guide
10dBA – Normal Breathing/Rustling Leaves
20-25dBA – Whisper
30dBA – High Quality Computer fan
40dBA – A Bubbling Brook, or a Refridgerator
50dBA – Normal Conversation
60dBA – Laughter
70dBA – Vacuum Cleaner or Hairdryer
80dBA – City Traffic or a Garbage Disposal
90dBA – Motorcycle or Lawnmower
100dBA – MP3 player at maximum output
110dBA – Orchestra
120dBA – Front row rock concert/Jet Engine
130dBA – Threshold of Pain
140dBA – Military Jet takeoff/Gunshot (close range)
160dBA – Instant Perforation of eardrum
Running at 5v the case fans are very quiet. As we expected, the large front in-take fan is virtually inaudible, at both 5v and 12v.
Running the fans at 12v raised overall noise levels by just under 6 dBA, though the noise was never that intrusive.
Doesnt look bad, but its a bit plasticky still. Never seen their cases in the flesh, would like a hands on before considering.
for me its a great case i fit nearly all cables easily just 24pin connector was little hard to put through rubber groumet cable management was ok only 2 cons for me is: 1. i wish front and top covers are metal 2. plastic pci-e cover makes noise so i take it out
This is a nice cheap mid tower case. My only problem with this is the lack of space for cable management, especially if you have a non-modular PSU, and the HDD drive tray is unremovable so it won’t fit a really large graphics card such as a Gigabyte GTX 970 which is around 300mm. If only the upper half of the HDD drive tray can be removed, then this would fit in any graphics card.