KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
The Seasonic X-Series 460W Fanless Power Supply is supplied in a dark coloured, subtle looking box which features the output capacity top right.
Our review sample contained some Seasonic branded Haribo chewy sweets which was a nice touch – we don't think these are supplied in a retail box, but we could be wrong. The box contains a bag with all the cables, next to the power supply itself.
The bundle contains a heavy duty dual pouch storage bag, some literature on the product and a manual, a regional specific power cable and cable tidies. There is also a case sticker and mounting screws for the system build phase.
I really do like the storage bag as it can comfortably hold many more cables than those supplied. No cramming cables into an undersized bag, which is refreshing.
| Cable | Connectors |
| ATX Connector (20+4) | x1 (600mm) |
| CPU 4+4 pin | x1 (650mm) |
| PCI E 8 pin (6 pin +2) | x2 (600mm) |
| Sata power connectors | x3 (550mm + 150mm + 150mm) |
| Sata power connectors | x2 (350mm + 150mm) |
| Peripheral 4 pin (molex) | x3 (500mm + 150mm + 150mm) |
| Peripheral 4 pin (molex) | x2 (350mm + 150mm) |
We appreciate the extra length 4+4 pin CPU power cable which runs to 650mm. The cables run to mixed sizes to suit a variety of cases and help to improve routing. Seasonic haven't cut corners with the cabling, sleeving them all.
Great design, but wow thats expensive. 850W are under £100 now.
Not much wrong with this, good efficiency, silent, nice bundle.
They make some great designs, id say 75% of the worlds best PSU designs are seasonic.
One slight problem which is made worse considering its intended application…
Many HTCP/cube cases sit the PSU against the side/top, assuming that the built in fan will push the hot air out of the back. This means that the top of the PSU is placed against a side/top panel with little to no gap (to save space)
As this PSU’s top panel is vented, and needs to be at the top, the side/top panel on the case will block it causing unsufficient ventilation. This means that the PSU can only really be used in more modern tower cases where the PSU is at the bottom.
This seems to me to be somewhat contrary to the intended use, don’t you think??
Hi Martin. You make a very good point. It would depend greatly on the specific chassis design and the air flow of the system. There may be some small physical case designs as you say that might have the top vented panel of the PSU partially blocked.
Hi Z
It wouldn’t be able use in my case for example. OK, it’s a cheap ‘cube’ case, similar to the Thermaltake Armor A30 but without the top fan. The PSU is set at the top of the case, tight against the roof. Also, take a look at the Antec Fusion Remote, the PSU is in it’s own ‘chamber’ (along with the 5.25 drives) with no top venting. And you can’t use this at all with most of the Silverstone Lascala’s and Grandia’s. They have the PSU set on it’s side so it’s a no go.
I don’t mean to do down what is clearly a very good PSU. I’d dearly love to have a fanless PSU in my HTPC.
It seems the only waypossible to use this though is to take a drill/saw to the top of most HTPC cases to create a vent and thus turning what you’s plan to be a pretty box sitting under your TV in to an eye-sore.
I guess much of my complaint is aimed at the case manufacturers that assume that the PSU will have it’s primary vent pushing air out of the back. They ought to have realised, seeing as fanless PSU’s have been around for a ling time, that HTPC case owners might want to use one and factored that in to their desins.
Sorry, I’ve just re-read that and realised I’m ranting a bit! I’ll put that down to my frustration at not being able to get my HTPC quiet enough!
Thanks for the great review!
Its actually a good point and I never thought about the problems as we are generally so focused on the design and performance, rather than the partnering cases available. Something like this would definitely need the vented top directly accessible to air and as you say a fan based PSU would be a safer option with restricted case designs.
There are some other higher output power supplies such as Corsair 750w and 850W models which don’t actually spin the fan until a specific power output is met, therefore in a low powered media center they would be silent, even when loaded (as long as the long variable is inside the limit for silent fan use).
Seasonic told us:
1. The 400/460FL is actually based on the X-850 platform so it can withstand quite a bit of abuse.
2. We have many customers put the PSU on its side without any heat issues because most HTPC system requirements is actually very low.
3. As well, so long as there is air flow movement within the case to the outside, it is enough for the PSU, especially due to the actual low consumption of most HTPC systems.
4. The FL series are all with OTP protection so when Temperature of critical components reaches a certain point, the PSU will shut down to protect itself.
5. All our X & P are hybrid Fanless with differences on to when the fan kicks in at what load points.
Caught one on sale for $100. Placed it upside down in a Lian Li PC V 351 with the side vents taped over so all the case air outflows through the ps. AMD A8 for HTPC. Sits behind TV . I never hear the fans and the outflow is barely warm.
I thought I read somewhere this is an X-750 without the fan. I have used other PS’s but now I only use Seasonics, never had a failure and voltage is rock solid over years of use.
I have read that such a PSU may annoy with a long pi sound, because this is difficult to create such a device. I am curious whether are many product returns? I am looking for a new PSU in vain. I think about buying a Thermaltake, but maybe such a device without a fan would be better?
PC24.de offers it for a pretty good price (although I should check it on Amazon).
I don’t want to send it back and have other troubles if it is not reliable enough.