Seasonic S12G-750 Power Supply Review

1. Introduction2. Seasonic S12G-750 (Bundle & Cables)3. Seasonic S12G 750W (External)4. Seasonic S12G-750 (Internal)5. Seasonic S12G-750 (Super High Res Gallery)6. Testing Methodology & Results7. Closing Thoughts8. View All Pages

Additional technical assistance: Peter McFarland and Jeremy Price.

Correctly testing power supplies is a complex procedure and KitGuru have configured a test bench which can deliver up to a 2,000 watt DC load. Due to public requests we have changed our temperature settings recently – previously we rated with ambient temperatures at 25C, we have increased ambient temperatures by 10c (to 35c) in our environment to greater reflect warmer internal chassis conditions.

We use combinations of the following hardware:
•  SunMoon SM-268
•  CSI3710A Programmable DC load (+3.3V and +5V outputs)
•  CSI3711A Programmable DC load (+12V1, +12V2, +12V3, and +12V4)
• Extech Power Analyzer
• Extech MultiMaster MM570 digital multimeter
• Extech digital sound level meter
• Digital oscilloscope (20M S/s with 12 Bit ADC)
• Variable Autotransformer, 1.4 KVA

DC Output Load Regulation
Combined DC Load	+3.3V		+5V		+12V		+5VSB		-12V
	A	V	A	V	A	V	A	V	A	V
75W	1.23	3.35	1.19	5.05	4.95	12.11	0.50	5.02	0.20	-12.05
150W	2.17	3.35	2.83	5.05	10.07	12.10	1.00	5.01	0.30	-12.06
375W	6.15	3.34	6.05	5.04	26.15	12.08	1.50	5.01	0.50	-12.07
565W	10.31	3.34	10.86	5.02	38.34	12.05	2.00	5.01	0.60	-12.07
750W	10.72	3.33	13.84	4.99	53.59	12.02	3.00	5.00	0.80	-12.08

Load regulation is excellent right across the output range.

Seasonic S12G 750W	Maximum Load
	844W

We managed to reach around 844W before the unit would shut down gracefully, after the protection kicked in. This is an excellent result.

Next we want to try Cross Loading. This basically means loads which are not balanced. If a PC for instance needs 500W on the +12V outputs but something like 30W via the combined 3.3V and +5V outputs then the voltage regulation can fluctuate badly.

Cross Load Testing	+3.3V		+5V		+12V		-12V		+5VSB
	A	V	A	V	A	V	A	V	A	V
734W	1.0	3.35	1.0	5.05	60.0	11.96	0.2	-12.02	0.50	5.02
154W	15.0	3.31	15.0	4.98	2.0	12.12	0.2	-12.01	0.50	5.01

The unit passes our Cross Load testing with a set of very good results. Even when we hit the +12V output with 60A, the line held at 11.96V.

We then used an oscilloscope to measure AC ripple and noise present on the DC outputs. We set the oscilloscope time base to check for AC ripple at both high and low ends of the spectrum.

ATX12V V2.2 specification for DC output ripple and noise is defined in the ATX 12V power supply design guide.

ATX12V Ver 2.2 Noise/Ripple Tolerance
Output	Ripple (mV p-p)
+3.3V	50
+5V	50
+12V1	120
+12V2	120
-12V	120
+5VSB	50

Obviously when measuring AC noise and ripple on the DC outputs the cleaner (less recorded) means we have a better end result. We measured this AC signal amplitude to see how closely the unit complied with the ATX standard.

AC Ripple (mV p-p)
DC Load	+3.3V	+5V	+12V	5VSB
75W	5	10	15	10
150W	10	10	15	15
375W	10	10	25	15
565W	15	15	30	15
750W	15	15	35	15

Ripple results are excellent, and all well within rated tolerance levels. The +12V output peaked at 35mV at full load which is an excellent result.

Efficiency (%)
75W	86.88
150W	88.34
375W	92.11
565W	89.56
750W	88.91

The Seasonic S12G 750W is a very efficient unit, peaking at 92% at 50% load. This drops to around 89% at full load. Very impressive results.

We take the issue of noise very seriously at KitGuru and this is why we have built a special home brew system as a reference point when we test noise levels of various components. Why do this? Well this means we can eliminate secondary noise pollution in the test room and concentrate on components we are testing. It also brings us slightly closer to industry standards, such as DIN 45635.

Today to test the power supply we have taken it into our acoustics room environment and have set our Digital Sound Level Noise Decibel Meter Style 2 one meter away from the unit. We have no other fans running so we can effectively measure just the noise from the unit itself.

As this can be a little confusing for people, here are various dBa ratings in with real world situations to help describe the various levels.

KitGuru noise guide
10dBA – Normal Breathing/Rustling Leaves
20-25dBA – Whisper
30dBA – High Quality Computer fan
40dBA – A Bubbling Brook, or a Refrigerator
50dBA – Normal Conversation
60dBA – Laughter
70dBA – Vacuum Cleaner or Hairdryer
80dBA – City Traffic or a Garbage Disposal
90dBA – Motorcycle or Lawnmower
100dBA – MP3 Player at maximum output
110dBA – Orchestra
120dBA – Front row rock concert/Jet Engine
130dBA – Threshold of Pain
140dBA – Military Jet takeoff/Gunshot (close range)
160dBA – Instant Perforation of eardrum

Noise (dBA)
75W	<28.0
150W	<28.0
375W	30.2
565W	32.7
750W	34.2

The large fan holds a low level of noise right through the range, spinning up at around 550W output. In the last 75W of output it rotates much faster although it never becomes intrusive even when holding a steady 750W load.

Temperature (c)
	Intake	Exhaust
75W	36	39
150W	38	42
375W	39	46
565W	45	55
750W	47	59

The 120mm fan spins slowly below 500W and the high level of efficiency means the heat produced isn't excessive at all. At full load it peaks at a 12c above ambient intake.

Maximum load	Efficiency
844W	87.9

For those interested, we measured efficiency when stressing the unit to breaking point. 87.7 percent efficiency at 823W … hardly practical, but interesting regardless.

Become a Patron!