KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
Correctly testing power supplies is a complex procedure and KitGuru have configured a test bench which can deliver up to a 2,000 watt DC load. Due to public requests we have changed our temperature settings recently – previously we rated with ambient temperatures at 25C, we have increased ambient temperatures by 10c (to 35c) in our environment to greater reflect warmer internal chassis conditions.
We use combinations of the following hardware:
• SunMoon SM-268
• CSI3710A Programmable DC load (+3.3V and +5V outputs)
• CSI3711A Programmable DC load (+12V1, +12V2, +12V3, and +12V4)
• Extech Power Analyzer
• Extech MultiMaster MM570 digital multimeter
• Extech digital sound level meter
• Digital oscilloscope (20M S/s with 12 Bit ADC)
• Variable Autotransformer, 1.4 KVA
12V output is single rail for our testing.
|
DC Output Load Regulation
|
||||||||||
|
Combined DC Load |
+3.3V
|
+5V
|
+12V
|
+5VSB
|
-12V | |||||
|
A
|
V
|
A
|
V
|
A
|
V
|
A
|
V
|
A | V | |
|
500W
|
7.63
|
3.33
|
8.82
|
5.01
|
36.05
|
12.03
|
1.5
|
5.01
|
0.30 | -12.02 |
|
750W
|
12.63
|
3.33
|
14.12
|
5.01
|
52.06
|
12.03
|
2.0
|
5.01
|
0.30 | -12.01 |
|
1000W
|
17.75
|
3.33
|
20.00
|
5.02
|
72.25
|
12.03
|
2.5
|
5.01
|
0.50 | -12.01 |
| 1250W | 18.84 | 3.33 | 24.04 | 5.01 | 90.14 | 12.02 | 3.0 | 5.01 | 0.60 | -12.02 |
|
1500W
|
18.87
|
3.33
|
22.64
|
5.00
|
115.90
|
12.01
|
3.5
|
5.01
|
0.80 | -12.02 |
| 1600W | 10.00 | 3.33 | 10.00 | 5.01 | 125.00 | 12.01 | 3.5 | 5.01 | 0.80 | -12.02 |
Load regulation is stellar, even when delivering the full 1600 watts of power.
Next we want to try Cross Loading. This basically means loads which are not balanced. If a PC for instance needs 500W on the +12V outputs but something like 30W via the combined 3.3V and +5V outputs then the voltage regulation can fluctuate badly.
| Cross Load Testing | +3.3V | +5V | +12V | -12V | +5VSB | |||||
| A | V | A | V | A | V | A | V | A | V | |
| 1150W | 3.0 | 3.33 | 2.0 | 5.02 | 92.0 | 12.01 | 0.2 | -12.02 | 0.50 | 5.02 |
| 250W | 20.0 | 3.33 | 24.0 | 5.02 | 5.0 | 12.01 | 0.2 | -12.02 | 0.50 | 5.01 |
The Seasonic TX-1600W Titanium Power Supply produced class leading results in the cross loading test. It exhibited no discernible weaknesses in any of the testing.
We then used an oscilloscope to measure AC ripple and noise present on the DC outputs. We set the oscilloscope time base to check for AC ripple at both high and low ends of the spectrum.
ATX12V V2.2 specification for DC output ripple and noise is defined in the ATX 12V power supply design guide.
|
ATX12V Ver 2.2 Noise/Ripple Tolerance
|
|
|
Output
|
Ripple (mV p-p)
|
|
+3.3V
|
50
|
|
+5V
|
50
|
|
+12V1
|
120
|
|
+12V2
|
120
|
|
-12V
|
120
|
|
+5VSB
|
50
|
Obviously when measuring AC noise and ripple on the DC outputs the cleaner (less recorded) means we have a better end result. We measured this AC signal amplitude to see how closely the unit complied with the ATX standard.
| AC Ripple (mV p-p) | ||||
| DC Load | +3.3V | +5V | +12V | 5VSB |
| 500W | 5 | 6 | 8 | 18 |
| 750W | 5 | 6 | 9 | 20 |
| 1000W | 5 | 6 | 10 | 22 |
| 1250W | 5 | 7 | 10 | 22 |
| 1500W | 8 | 7 | 13 | 23 |
| 1600W | 11 | 8 | 16 | 30 |
Great ripple suppression results throughout the testing, showcasing how good the design is.
|
Efficiency (%)
|
|
|
500W
|
93.88
|
|
750W
|
95.74
|
|
1000W
|
96.22
|
|
1250W
|
95.43
|
| 1500W | 94.58 |
| 1600W | 94.33 |
Overall efficiency is superb, peaking over 96% at around 50% load.
We take the issue of noise very seriously at KitGuru and this is why we have built a special home brew system as a reference point when we test noise levels of various components. Why do this? Well this means we can eliminate secondary noise pollution in the test room and concentrate on components we are testing. It also brings us slightly closer to industry standards, such as DIN 45635.
Today to test the power supply we have taken it into our acoustics room environment and have set our Digital Sound Level Noise Decibel Meter Style 2 one meter away from the unit. We have no other fans running so we can effectively measure just the noise from the unit itself.
As this can be a little confusing for people, here are various dBa ratings in with real world situations to help describe the various levels.
KitGuru noise guide
10dBA – Normal Breathing/Rustling Leaves
20-25dBA – Whisper
30dBA – High Quality Computer fan
40dBA – A Bubbling Brook, or a Refrigerator
50dBA – Normal Conversation
60dBA – Laughter
70dBA – Vacuum Cleaner or Hairdryer
80dBA – City Traffic or a Garbage Disposal
90dBA – Motorcycle or Lawnmower
100dBA – MP3 Player at maximum output
110dBA – Orchestra
120dBA – Front row rock concert/Jet Engine
130dBA – Threshold of Pain
140dBA – Military Jet takeoff/Gunshot (close range)
160dBA – Instant Perforation of eardrum
|
Noise (dBA)
|
|
|
500W
|
<28.0
|
|
750W
|
<28.0
|
|
1000W
|
<28.0
|
|
1250W
|
31.2
|
| 1500W | 31.9 |
| 1600W | 32.2 |
This is one of the quietest high power supplies we have ever tested. Up until 1100 watts the fan remains inaudible and even in the last 200-300 watts of power delivery our equipment hardly registered any output noise above ambient (I am slightly limited in my environment to measure less than 28dBa). I am confident if Noctua had included a 135mm version of this fan, it would almost act like a passively cooled power supply.
As it stands these are truly excellent results, and class leading by any term of the word.
|
Temperature (c)
|
||
|
Intake
|
Exhaust
|
|
|
500W
|
36
|
38
|
|
750W
|
37
|
43
|
|
1000W
|
42
|
46
|
|
1250W
|
46
|
51
|
|
1500W
|
48
|
52
|
| 1600W | 50 | 55 |
The highly efficient Seasonic Titanium design, combined with the proprietary grille design, and the custom Noctua fan ensures this is a trifecta like no other !
