Seasonic Platinum 1050WXP3 PSU Review

1. Introduction2. Seasonic Platinum 1050W (Bundle/Cabling)3. Seasonic Platinum 1050W (External)4. Seasonic Platinum 1050W (Internal)5. Seasonic Platinum 1050WXP3 (High Res Gallery)6. Testing Methodology & Results7. Closing Thoughts8. View All Pages

Additional technical assistance: Peter McFarland and Jeremy Price.

Correctly testing power supplies is a complex procedure and KitGuru have configured a test bench which can deliver up to a 2,000 watt DC load. Due to public requests we have changed our temperature settings – previously we rated with ambient temperatures at 25C, we have increased ambient temperatures by 10c (to 35c) in our environment to greater reflect warmer internal chassis conditions.

We use combinations of the following hardware:

• SunMoon SM-268
• CSI3710A Programmable DC load (+3.3V and +5V outputs)
• CSI3711A Programmable DC load (+12V1, +12V2, +12V3, and +12V4)
• Extech Power Analyzer
• Extech MultiMaster MM570 digital multimeter
• SkyTronic DSL 2 Digital Sound Level Meter (6-130dBa)
• Digital oscilloscope (20M S/s with 12 Bit ADC)
• Variable Autotransformer, 1.4 KVA

We test the Seasonic Platinum 1050W power supply with the fan in the ‘normal’ state.

DC Output Load Regulation
Combined DC Load	+3.3V		+5V		+12V		+5VSB		-12V
	A	V	A	V	A	V	A	V	A	V
100W	1.55	3.35	1.75	5.07	6.65	12.12	0.50	5.01	0.20	-12.03
200W	3.13	3.34	3.50	5.07	13.50	12.12	1.00	5.01	0.20	-12.03
400W	6.40	3.34	7.05	5.07	27.50	12.12	1.50	5.00	0.30	-12.04
600W	9.80	3.33	10.77	5.05	41.70	12.10	2.00	4.99	0.30	-12.03
800W	13.25	3.33	14.55	5.05	56.40	12.08	2.50	4.99	0.50	-12.04
1050W	16.55	3.33	15.75	5.04	74.00	12.07	3.00	4.99	0.60	-12.03

Load regulation is fantastic with all the rails holding tight, within 1.5%.

Seasonic Platinum 1050WXP3	Maximum Load
	1202W

We managed to get another 152W from the power supply before the protection circuitry kicked in. The supply was undamaged and it was ready to fire up again when we dropped the load to a more realistic level.

Next we want to try Cross Loading. This basically means loads which are not balanced. If a PC for instance needs 500W on the +12V outputs but something like 30W via the combined 3.3V and +5V outputs then the voltage regulation can fluctuate badly.

Cross Load Testing	+3.3V		+5V		+12V		-12V		+5VSB
	A	V	A	V	A	V	A	V	A	V
885W	2.0	3.34	2.0	5.04	72.0	12.08	0.2	-12.03	0.50	5.01
240W	20.0	3.33	24.0	5.03	2.0	12.10	0.2	-12.03	0.50	5.01

The Seasonic Platinum 1050WXP3 power supply delivered a great set of results in the demanding Cross load test, as shown above.

We then used an oscilloscope to measure AC ripple and noise present on the DC outputs. We set the oscilloscope time base to check for AC ripple at both high and low ends of the spectrum. ATX12V V2.2 specification for DC output ripple and noise is defined in the ATX 12V power supply design guide.

ATX12V Ver 2.2 Noise/Ripple Tolerance
Output	Ripple (mV p-p)
+3.3V	50
+5V	50
+12V1	120
+12V2	120
-12V	120
+5VSB	50

Obviously when measuring AC noise and ripple on the DC outputs the cleaner (less recorded) means we have a better end result. We measured this AC signal amplitude to see how closely the unit complied with the ATX standard.

AC Ripple (mV p-p)
DC Load	+3.3V	+5V	+12V	5VSB
100W	10	10	15	5
200W	15	10	15	10
400W	15	10	20	10
600W	15	15	20	15
800W	15	15	25	15
1050W	15	20	30	15

Ripple suppression is very good. All of the rails exhibit very low ripple and the +12v rail for instance peaks at 30mV, well within the rated specifications.

Efficiency (%)
100W	85.5
200W	88.7
300W	93.2
500W	94.4
800W	93.4
1050W	92.2

The overall efficiency results are excellent, peaking at 94.4% at 500W. This drops close to 92% efficiency at full load, a very impressive result.

We take the issue of noise very seriously at KitGuru and this is why we have built a special home brew system as a reference point when we test noise levels of various components. Why do this? Well this means we can eliminate secondary noise pollution in the test room and concentrate on components we are testing. It also brings us slightly closer to industry standards, such as DIN 45635.

Today to test the Power Supply we have taken it into our acoustics room environment and have set our SkyTronic DSL 2 Digital Sound Level Meter (6-130dBa) one meter away from the unit. We have no other fans running so we can effectively measure just the noise from the unit itself.

As this can be a little confusing for people, here are various dBa ratings in with real world situations to help describe the various levels.

KitGuru noise guide

10dBA – Normal Breathing/Rustling Leaves
20-25dBA – Whisper
30dBA – High Quality Computer fan
40dBA – A Bubbling Brook, or a Refrigerator
50dBA – Normal Conversation
60dBA – Laughter
70dBA – Vacuum Cleaner or Hairdryer
80dBA – City Traffic or a Garbage Disposal
90dBA – Motorcycle or Lawnmower
100dBA – MP3 Player at maximum output
110dBA – Orchestra
120dBA – Front row rock concert/Jet Engine
130dBA – Threshold of Pain
140dBA – Military Jet takeoff/Gunshot (close range)
160dBA – Instant Perforation of eardrum

Noise (dBA)
100W	28.0
200W	28.0
400W	30.9
600W	32.0
800W	33.2
1050W	34.3

The Seasonic Platinum 1050WXP3 power supply is very quiet under normal circumstances, and basically silent until around 550Watts of power is demanded. The fan profile holds fairly steady until around 800 watts is needed. The fan quickly spins up in the last 100 watts of power output, however this isn’t really a practical way to run a system.

Temperature (c)
	Intake	Exhaust
100W	35	38
200W	35	41
400W	37	43
650W	43	51
800W	45	52
1050W	47	59

Temperatures are well controlled as the fan spins actively once load hits 900W load and beyond.

Maximum load	Efficiency
1202W	91.3

Pushing the power supply above its rated limits generates an efficiency level of around 91.3%. This is not a viable ‘real world’ situation, but its interesting nonetheless.

Become a Patron!