LEPA G1600 MA EU 1600W PSU Review

Allan 'Zardon' Campbell August 26, 2014 Featured Tech Reviews, Power Supplies

The power supply is using an ADDA 135mm ball bearing fan with model number ADN512UB-A90. It is rated 0.44A when operating at 12VDC.

The design, even though a few years old by today's standards, is still very clean. Soldering quality is suitably high for a unit like this.

The AC receptacle has a complete line filter and it also has two additional Y capacitors. The transient filter continues to the main PCB and has two Y Caps, an X Cap, three CM chokes and an MOV. The single bridge rectifier is connected to a dedicated heatsink.

The power supply uses three high grade 105C Japanese capacitors – by Panasonic – rated 400V, 330uF. Secondary capacitors are by Rubycon – some of which are filtering the +12V rail.