Kolink Continuum KL-C1500PL PSU review – one for miners!

1. Introduction2. Bundle & Cabling3. External4. Internal5. Testing Methodology and Results6. Closing Thoughts7. View All Pages

The Kolink Continuum 1500W power supply arrives in a rather bland looking box with some images of the unit on the front. No mention of the high efficiency either which seems somewhat of an oversight.

The rear of the box features some information in multi languages.

There are plenty of cables included in the box including a total of 12 PCIe power connectors. Four of the connectors are available on single cables with the other eight available across four cables in dual configurations. The cables with the blue connectors are in fact the PCIe cables.

I liked the fact that the EPS cable is 70 cm long – it will work well inside larger chassis.

The cables are all flat ribbon style for ease of routing during the build phase. We didn't get a C19 power cable with this supply, which seems unusual. I asked Kolink about this omission and they said miners specifically asked them not to ship them as they use their own cables. I told Kolink that regardless, it seems a wise move to include a C19 cable and they may be offering bundle options via CaseKing (and subsequently Overclockers UK).

Motherboard: 1x 20+4-pin ATX12V/EPS12V (approx. 640 mm)
. CPU: 2x 4+4-pin ATX12V/EPS12V (approx. 740 mm)
4×2 6+2 pin PCIe (approx. 630 / 700 mm), 4x 6+2 pin PCIe (approx. 650 mm); 0 in total 12x 6+2 pin PCIe
. 8x SATA (up to approx. 1080 mm)
8x 4-pin Molex (approx. 630 to 1080 mm)

Become a Patron!