KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
Additional technical assistance: Peter McFarland and Jeremy Price.
Correctly testing power supplies is a complex procedure and KitGuru have configured a test bench which can deliver up to a 2,000 watt DC load. Due to public requests we have changed our temperature settings increasing ambient temperatures by 10c (to 35c) in our environment to greater reflect warmer internal chassis conditions.
We use combinations of the following hardware:
• SunMoon SM-268
• CSI3710A Programmable DC load (+3.3V and +5V outputs)
• CSI3711A Programmable DC load (+12V1, +12V2, +12V3, and +12V4)
• Extech Power Analyzer
• Extech MultiMaster MM570 digital multimeter
• SkyTronic DSL 2 Digital Sound Level Meter (6-130dBa)
• Digital oscilloscope (20M S/s with 12 Bit ADC)
• Variable Autotransformer, 1.4 KVA
We combine all +12V output for the results below.
|
DC Output Load Regulation
|
||||||||
|
Combined DC Load |
+3.3V
|
+5V
|
+12V
|
+5VSB
|
||||
|
A
|
V
|
A
|
V
|
A
|
V
|
A
|
V
|
|
|
110W
|
1.18
|
3.34
|
1.18
|
5.03
|
8.02
|
12.05
|
0.50
|
5.02
|
|
220W
|
2.06
|
3.34
|
2.07
|
5.02
|
16.13
|
12.03
|
0.50
|
5.02
|
|
340W
|
3.05
|
3.33
|
3.06
|
5.02
|
25.14
|
12.02
|
1.00
|
5.02
|
| 445W |
4.12
|
3.33
|
4.06
|
5.01
|
33.25
|
11.99
|
1.50
|
5.01 |
|
550W
|
5.15
|
3.33
|
5.02
|
5.00
|
41.05
|
11.96
|
2.50
|
5.02
|
| Cooler Master V Series 550W |
Maximum Load |
| 588W |
Load regulation is good across the output range. The power supply delivered 588 watts of power before it would shut down, safely.
Next we want to try Cross Loading. This basically means loads which are not balanced. If a PC for instance needs 500W on the +12V outputs but something like 30W via the combined 3.3V and +5V outputs then the voltage regulation can fluctuate badly.
| Cross Load Testing | +3.3V | +5V | +12V | -12V | +5VSB | |||||
| A | V | A | V | A | V | A | V | A | V | |
| 493W | 1.0 | 3.34 | 1.0 | 5.05 | 40.5 | 11.94 | 0.2 | -12.04 | 0.50 | 5.02 |
| 153W | 15.0 | 3.32 | 15.0 | 4.97 | 2.0 | 12.05 | 0.2 | -12.05 | 0.50 | 5.01 |
The unit passed the Cross Load test without any problems.
We then used an oscilloscope to measure AC ripple and noise present on the DC outputs. We set the oscilloscope time base to check for AC ripple at both high and low ends of the spectrum. ATX12V V2.2 specification for DC output ripple and noise is defined in the ATX 12V power supply design guide.
|
ATX12V Ver 2.2 Noise/Ripple Tolerance
|
|
|
Output
|
Ripple (mV p-p)
|
|
+3.3V
|
50
|
|
+5V
|
50
|
|
+12V1
|
120
|
|
+12V2
|
120
|
|
-12V
|
120
|
|
+5VSB
|
50
|
Obviously when measuring AC noise and ripple on the DC outputs the cleaner (less recorded) means we have a better end result. We measured this AC signal amplitude to see how closely the unit complied with the ATX standard.
| AC Ripple (mV p-p) | ||||
| DC Load | +3.3V | +5V | +12V | 5VSB |
| 110W | 10 | 10 | 15 | 5 |
| 220W | 10 | 10 | 25 | 5 |
| 340W | 15 | 15 | 30 | 10 |
| 445W | 20 | 15 | 35 | 10 |
| 550W | 25 | 15 | 35 | 15 |
Noise suppression is good if not class leading, peaking at 35 mV at full load on the +12V output. All other rails held to 15mV-25mV when fully loaded. No concerns here.
|
Efficiency (%)
|
|
|
110W
|
88.67
|
|
220W
|
91.45
|
|
340W
|
92.11
|
|
445W
|
91.76
|
|
550W
|
90.22
|
Efficiency is excellent, peaking at around 92% at 50% load. At full load, this drops to around 90%. Great results.
We take the issue of noise very seriously at KitGuru and this is why we have built a special home brew system as a reference point when we test noise levels of various components. Why do this? Well this means we can eliminate secondary noise pollution in the test room and concentrate on components we are testing. It also brings us slightly closer to industry standards, such as DIN 45635.
Today to test the Power Supply we have taken it into our acoustics room environment and have set our SkyTronic DSL 2 Digital Sound Level Meter (6-130dBa) one meter away from the unit. We have no other fans running so we can effectively measure just the noise from the unit itself. That said, measuring lower than 28dBa proves very difficult, unless in strict laboratory conditions.
As this can be a little confusing for people, here are various dBa ratings in with real world situations to help describe the various levels.
KitGuru noise guide
10dBA – Normal Breathing/Rustling Leaves
20-25dBA – Whisper
30dBA – High Quality Computer fan
40dBA – A Bubbling Brook, or a Refrigerator
50dBA – Normal Conversation
60dBA – Laughter
70dBA – Vacuum Cleaner or Hairdryer
80dBA – City Traffic or a Garbage Disposal
90dBA – Motorcycle or Lawnmower
100dBA – MP3 Player at maximum output
110dBA – Orchestra
120dBA – Front row rock concert/Jet Engine
130dBA – Threshold of Pain
140dBA – Military Jet takeoff/Gunshot (close range)
160dBA – Instant Perforation of eardrum
|
Noise (dBA)
|
|
|
110W
|
<28.0
|
|
220W
|
<28.0
|
|
340W
|
28.2
|
|
445W
|
30.5
|
| 550W | 32.6 |
We registered very little fan noise at all until around 450 watts when it started to spin up more actively. At full load, the power supply registered only 32.6dBa which is excellent.
|
Temperature (c)
|
||
|
Intake
|
Exhaust
|
|
|
110W
|
36
|
40
|
|
220W
|
37
|
43
|
|
340W
|
41
|
45
|
|
445W
|
45
|
48
|
|
550W
|
47
|
54
|
The large, quiet fan produces enough air flow to help maintain controlled ambient temperatures.
|
Maximum load
|
Efficiency
|
|
588W
|
89.77
|
Pushing the power supply above its rated limits generates an efficiency level of 89.77%. This is not a viable ‘real world’ situation, but its interesting nonetheless.
