KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
Correctly testing power supplies is a complex procedure and KitGuru have configured a test bench which can deliver up to a 2,000 watt DC load. We run at 35c in our environment to greater reflect warmer internal chassis conditions.
We use combinations of the following hardware:
• SunMoon SM-268
• CSI3710A Programmable DC load (+3.3V and +5V outputs)
• CSI3711A Programmable DC load (+12V1, +12V2, +12V3, and +12V4)
• Extech Power Analyzer
• Extech MultiMaster MM570 digital multimeter
• Extech digital sound level meter
• Digital oscilloscope (20M S/s with 12 Bit ADC)
• Variable Autotransformer, 1.4 KVA
We test in a single +12V configuration.
|
DC Output Load Regulation
|
||||||||||
|
Combined DC Load |
+3.3V
|
+5V
|
+12V
|
+5VSB
|
-12V | |||||
|
A
|
V
|
A
|
V
|
A
|
V
|
A
|
V
|
A | V | |
|
85W
|
0.95
|
3.34
|
0.92
|
5.02
|
6.00
|
12.05
|
0.50
|
5.02
|
0.20 | -12.02 |
|
170W
|
1.70
|
3.34
|
1.67
|
5.01
|
12.35
|
12.05
|
1.00
|
5.02
|
0.20 | -12.02 |
|
425W
|
3.00
|
3.34
|
3.05
|
5.01
|
32.20
|
12.04
|
1.50
|
5.01
|
0.30 | -12.02 |
| 640W | 4.05 | 3.33 | 4.05 | 5.01 | 49.00 | 12.04 | 2.00 | 5.01 | 0.30 | -12.03 |
|
850W
|
5.00
|
3.33
|
5.23
|
5.01
|
65.52
|
12.00
|
2.50
|
5.01
|
0.50 | -12.02 |
Load regulation is very strong with the rails holding with 1% of recommended specifications.
| ASUS ROG Thor 850W Platinum Power Supply Review | Maximum Load |
| 965W |
We managed to get the power supply to deliver 965W before it would shut down, delivering around 115W more than rated specifications.
Next we want to try Cross Loading. This basically means loads which are not balanced. If a PC for instance needs 500W on the +12V outputs but something like 30W via the combined 3.3V and +5V outputs then the voltage regulation can fluctuate badly.
| Cross Load Testing | +3.3V | +5V | +12V | -12V | +5VSB | |||||
| A | V | A | V | A | V | A | V | A | V | |
| 760W | 1.0 | 3.34 | 1.0 | 5.01 | 60.0 | 11.98 | 0.2 | -12.01 | 0.50 | 5.02 |
| 165W | 15.0 | 3.32 | 18.0 | 4.97 | 2.0 | 12.03 | 0.2 | -12.02 | 0.50 | 5.01 |
The power supply dealt with the demanding cross load test very well exhibiting little fluctuation. It was tasked with 60A on the +12V rail and it held at 11.98W. The other rails delivered excellent results also.
We then used an oscilloscope to measure AC ripple and noise present on the DC outputs. We set the oscilloscope time base to check for AC ripple at both high and low ends of the spectrum.
ATX12V V2.2 specification for DC output ripple and noise is defined in the ATX 12V power supply design guide.
|
ATX12V Ver 2.2 Noise/Ripple Tolerance
|
|
|
Output
|
Ripple (mV p-p)
|
|
+3.3V
|
50
|
|
+5V
|
50
|
|
+12V1
|
120
|
|
+12V2
|
120
|
|
-12V
|
120
|
|
+5VSB
|
50
|
Obviously when measuring AC noise and ripple on the DC outputs the cleaner (less recorded) means we have a better end result. We measured this AC signal amplitude to see how closely the unit complied with the ATX standard.
| AC Ripple (mV p-p) | ||||
| DC Load | +3.3V | +5V | +12V | 5VSB |
| 100W | 10 | 5 | 15 | 10 |
| 225W | 10 | 5 | 15 | 10 |
| 450W | 10 | 5 | 15 | 10 |
| 675W | 15 | 10 | 20 | 15 |
| 850W | 20 | 10 | 20 | 15 |
Noise suppression is great, peaking at 20mV and 10mV on the +3.3V and +5V rails respectively. The +12V rail peaked at 20mV at full load. Super results all round.
|
Efficiency (%) 240V
|
|
|
100W
|
90.5
|
|
225W
|
92.3
|
|
450W
|
94.1
|
|
675W
|
93.7
|
| 850W | 92.6 |
Efficiency is yet again top of the field, peaking at around 94% at close to 50% load. At full load this drops to around 92.6%.
We take the issue of noise very seriously at KitGuru and this is why we have built a special home brew system as a reference point when we test noise levels of various components. Why do this? Well this means we can eliminate secondary noise pollution in the test room and concentrate on components we are testing. It also brings us slightly closer to industry standards, such as DIN 45635.
Today to test the power supply we have taken it into our acoustics room environment and have set our Digital Sound Level Noise Decibel Meter Style 2 one meter away from the unit. We have no other fans running so we can effectively measure just the noise from the unit itself.
As this can be a little confusing for people, here are various dBa ratings in with real world situations to help describe the various levels.
KitGuru noise guide
10dBA – Normal Breathing/Rustling Leaves
20-25dBA – Whisper
30dBA – High Quality Computer fan
40dBA – A Bubbling Brook, or a Refrigerator
50dBA – Normal Conversation
60dBA – Laughter
70dBA – Vacuum Cleaner or Hairdryer
80dBA – City Traffic or a Garbage Disposal
90dBA – Motorcycle or Lawnmower
100dBA – MP3 Player at maximum output
110dBA – Orchestra
120dBA – Front row rock concert/Jet Engine
130dBA – Threshold of Pain
140dBA – Military Jet takeoff/Gunshot (close range)
160dBA – Instant Perforation of eardrum
|
Noise (dBA)
|
|
|
100W
|
<28.0
|
|
225W
|
<28.0
|
|
450W
|
<28.0
|
|
675W
|
31.2
|
| 850W | 33.8 |
This is a very quite power supply, with such high efficiency and beefy heatsinks, the fan profile is set to be very non aggressive, even at higher loads. It is only when close to full load that you can pick the fan noise up from a few meters away. Its overall an extremely quiet unit.
Full marks to ASUS for their modifications internally. They not only look great, but technically they help improve cooling performance.
|
Temperature (c)
|
||
|
Intake
|
Exhaust
|
|
|
100W
|
37
|
38
|
|
225W
|
38
|
42
|
|
450W
|
39
|
44
|
|
675W
|
43
|
49
|
|
850W
|
45
|
53
|
The fan may not be too active, but the huge heatsinks ensure that the temperatures are maintained throughout the load range. Very impressive results again.
|
Maximum load
|
Efficiency
|
|
965 watts
|
91.7
|
At 965 watts, this unit managed to deliver efficiency at 91.7%. A very strong showing indeed.
