KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
Futuremark released 3DMark Vantage, on April 28, 2008. It is a benchmark based upon DirectX 10, and therefore will only run under Windows Vista (Service Pack 1 is stated as a requirement) and Windows 7. This is the first edition where the feature-restricted, free of charge version could not be used any number of times. 1280×1024 resolution was used with performance settings.
The overclocked GTX680 scores 37,688 points which is incredible for a single GPU. The processor scores 81,643 points which raises the overall score to 43,564 points.
I love the heatsink idea with the cover, but it looks like it might block some of the bigger CPU coolers, hard to tell going on the information but it looks tight near the top of the board.
Great review. So, it did or didn’t OC stable to 5Ghz with the H100?
Thanks for a great review!
I have a couple of questions about this motherboard with a Noctua NH-D14 cooler – firstly if it fits and secondly if the motherboard is able to control the Noctua fan speeds (they are 3 pin fans, not PWM).
yeah 5ghz is stable with one of the samples I have, but they all vary. 4.8ghz is best all round spot with less voltage and a cheaper cooler (for most people anyway).
If you give me a few days ill try with a D14, didnt for the review, but I have one in another drawer.
Great! Thanks =)
Zardon. Any new about the D14, with this board? Its compatible?
I’m getting this board and want to know, would the Thermalright Silver Arrow cpu cooler fit above the TUF Armor? With two 140mm fans attached?
Hi there, the NH D14 fits – but its close. As for the question on the Silver Arrow CPU cooler, I dont have one here, but ill try and get hold of one.
Thanks for the quick answer. Hopefully it will since the D14 fits. But this pic has me really concerned:
http://www.overclockers.ru/images/lab/2010/11/25/391_thermalright_silver_arrow_onmobo_big.jpg
Actually looking at that, it looks as if it would fit. I can’t guarantee it, but I have the board at the same angle on the desk here and it looks as if it would fit fine.
Remember, I know its not ideal, but you can remove the protective shell in a worst case scenario, so the board isnt redundant if there are some fitting issues.
Since the looks of TUF armor are one of the reasons why I want that mobo It would be a waste to remove it. Also I heard that it cools well with the 2 small fans, and I don’t mind a little bit of noise. If the Silver Arrow wouldn’t fit, I’d get a Corsair H100 and normal RAM with heatsinks, so that’s why I wanted to know in advance. According to reviews the H100 is behind by a few degrees and is also more expensive, so I wanna have the Silver Arrow which is currently the best no-maintenance cooler, if it would fit.
Quote: “Quad GPU AMD CrossfireX – a flawless architecture accommodating the power of up to four graphics cards” /Quote
So where do Install the 4 graphics cards?
I see 3 slots
I think they do that, saying quad is possible with two cards, but its actually tri crossfire
did you downclock your RAM to OC? page 4 bottom pic. RAM speed=800 mhz…
Thats 1,600mhz. its how DDR3 memory is reported in those programs Matt.