Handbrake is a fantastic free program which we wanted to include to confirm findings with Media Espresso, earlier in the review. HandBrake is an open-source, GPL-licensed, multiplatform, multithreaded video transcoder, available for MacOS X, Linux and Windows.
We used the latest V 0.9.5 for testing today across all platforms. We encoded an DVD.MPG file.
The system finishes the encoding duties in 4 minutes and 54 seconds, around 3 seconds faster than the reference clocked 990X.
Tags Asus Sabertooth Z77 Motherboard Asus Sabertooth Z77 Motherboard Review Asus Sabertooth Z77 Motherboard Review (with OC GTX680) Asus Sabretooth Z77 Motherboard Asus Sabretooth Z77 Motherboard Review Asus Z77 Sabertooth Intel Z77 Asus Z77 Sabertooth Intel Z77 review news Review
The Tryx Luca L70 had some negative press at launch but is it really that bad?
Pingback: Asus Sabertooth Z77 Motherboard Review (with OC GTX680) – KitGuru | Notebooks PC
Pingback: Intel Panther Point Mainboards - News Reviews Specs Bilder (Z77 Z75 H77 Q77 Q75 B75) - Seite 39
Pingback: My gaming rig i want to buy&questions - Electronic Arts UK Community
Pingback: For those who prefer their boards with a bit of experience, MSI’s Big Bang XPower II X79 - IT Lounge
Pingback: Daily Hardware Reviews for 4/11/12
KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
I love the heatsink idea with the cover, but it looks like it might block some of the bigger CPU coolers, hard to tell going on the information but it looks tight near the top of the board.
Great review. So, it did or didn’t OC stable to 5Ghz with the H100?
Thanks for a great review!
I have a couple of questions about this motherboard with a Noctua NH-D14 cooler – firstly if it fits and secondly if the motherboard is able to control the Noctua fan speeds (they are 3 pin fans, not PWM).
yeah 5ghz is stable with one of the samples I have, but they all vary. 4.8ghz is best all round spot with less voltage and a cheaper cooler (for most people anyway).
If you give me a few days ill try with a D14, didnt for the review, but I have one in another drawer.
Great! Thanks =)
Zardon. Any new about the D14, with this board? Its compatible?
I’m getting this board and want to know, would the Thermalright Silver Arrow cpu cooler fit above the TUF Armor? With two 140mm fans attached?
Hi there, the NH D14 fits – but its close. As for the question on the Silver Arrow CPU cooler, I dont have one here, but ill try and get hold of one.
Thanks for the quick answer. Hopefully it will since the D14 fits. But this pic has me really concerned:
http://www.overclockers.ru/images/lab/2010/11/25/391_thermalright_silver_arrow_onmobo_big.jpg
Actually looking at that, it looks as if it would fit. I can’t guarantee it, but I have the board at the same angle on the desk here and it looks as if it would fit fine.
Remember, I know its not ideal, but you can remove the protective shell in a worst case scenario, so the board isnt redundant if there are some fitting issues.
Since the looks of TUF armor are one of the reasons why I want that mobo It would be a waste to remove it. Also I heard that it cools well with the 2 small fans, and I don’t mind a little bit of noise. If the Silver Arrow wouldn’t fit, I’d get a Corsair H100 and normal RAM with heatsinks, so that’s why I wanted to know in advance. According to reviews the H100 is behind by a few degrees and is also more expensive, so I wanna have the Silver Arrow which is currently the best no-maintenance cooler, if it would fit.
Quote: “Quad GPU AMD CrossfireX – a flawless architecture accommodating the power of up to four graphics cards” /Quote
So where do Install the 4 graphics cards?
I see 3 slots
I think they do that, saying quad is possible with two cards, but its actually tri crossfire
did you downclock your RAM to OC? page 4 bottom pic. RAM speed=800 mhz…
Thats 1,600mhz. its how DDR3 memory is reported in those programs Matt.