Home / Tech News / Featured Announcement / Asus P8Z68-V LX Motherboard Review

Asus P8Z68-V LX Motherboard Review

Many people using this system will be enjoying Flash related content so we feel it is important to test with some of the more demanding material available freely online. Full hardware acceleration is enabled.

This generation of hardware really has no problems with playback of 1080p flash related content, averaging just over 7 percent.

Become a Patron!

Check Also

KitGuru Advent Calendar Day 22: Win one of TWO Sharkoon gaming chairs!

For Day 22 of the KitGuru Advent Calendar, we are teaming up with Sharkoon to give TWO lucky readers a new ergonomic chair! 

14 comments

  1. Yeah, hard to grumble for £90. AMD motherboards are still expensive for their high end processors. always a problem iMO.

  2. Good cheap board, but I think someone buying a 2600k might spend £40 more. Surprised on the lack of heatsinks, but it looks as if it doesnt effect overall performance which is good to hear.

    I am holding fire on a new system until summer next year, i expect a new range by then,.

  3. one silly question why they have diff clips for blue and black ram slots

  4. Thanks, been waiting for a review of this for a while. I agree the sata cable deal is bad, two cables? they probably cost 10c to asus. immore interested in the board though for a potential 2500k build.

  5. Yeah, thats unusual, two different clips for the memory? maybe they use left over stock for these boards? not that it really matters.

  6. + meant to add in the last post. i dont mind about the bundle, i have tons of satacables. two is ok for the price. did you use them for the SATA testing? I bought an asrock board earlier this year and they supplied some terrible cables which killed my drive performance (by 100mb/s)

  7. What ASROCK board was that Ian? never had a problem with any cables on ASROCK boards. Yes, used one of the cables they supplied for the PATRIOT drive testing. good quality.

  8. If I was using this board im afraid id want a huge fan over it at all times, especially when overclocking. there are no heatsinks at all around the CPu socket, and those resistors will get very hot under load.