Home / Tech News / Featured Tech News / ASRock Z68 Extreme7 Gen3 Review

ASRock Z68 Extreme7 Gen3 Review

Just Cause is an open world action-adventure video game developed by Avalanche Studios and published by Eidos Interactive. It was released for Microsoft Windows, PlayStation 2, Xbox, Xbox 360 on September 22, 2006 in Europe, September 27, 2006 in North America, September 29, 2006 in Australia and November 8, 2007 in Japan. The fictional area explored during the game is described as being over 250,000 acres (1,012 km2; 391 sq mi) in size, with 21 story missions and over 300 side missions to complete.

Around a 5 frames per second improvement from the ASRock Z68 Extreme 7 Gen3 system. Not really noticeable in the ‘real world' but repeatable.

Become a Patron!

Check Also

Leaker reveals Nvidia RTX 5070 and RTX 5070 Ti specifications

Various reports and leaks have been targeting the Nvidia GeForce RTX 50 series lineup lately, …

12 comments

  1. Very nice indeed, looks great. I need a system upgrade, it kills me everytime I read a review of a new mobo 🙁

  2. Yeah they are really good now, I hate however how some forums have idiots who are ‘experts’ who say they still suck. I have a P67 board of theirs (B3) and it is brilliant, never a problem. hits 4.6ghz with my 2500k no problem too.

  3. x16/x16 is quite rare on these systems. good job ASROCK. bit expensive though isnt it?

  4. This $275 board is meant for triple card multi-monitor setups, and is in direct competition with the $350 Maximus IV Extreme-Z, $360 UD7, $370 G1. Sniper2 budget and $310 FTW.

    IMO, if a current triple-CF/SLI setup is the priority and you already own a dedicated SSD, sacrificing the Z68 futures for the $235 P67 WS Revolution is a better deal.

  5. AFAIK, the NF200 bridge/switch is PCIe 2.0. If it is to handle the traffic from 3 PCIe slots to the CPU, then how will do it at PCIe 3.0 speed with PCIe 3.0 video cards and CPU??

    Ramon

  6. Why are the first two pci-e slots so close together?

  7. @ Carl. The second slot is the PCIE 3.0 compatible one. If you use SLI etc, I think you are meant to use slot 1 and 3.

  8. Wich setting in the bios do have you change in the bios to achieve 4,6ghz?