Home / Channel / Computex / Gigabyte details premium Z170 platforms: DDR4, 32Gb/s M.2, 16Gb/s SATAe, Thunderbolt 3

Gigabyte details premium Z170 platforms: DDR4, 32Gb/s M.2, 16Gb/s SATAe, Thunderbolt 3

Gigabyte Technology at Computex revealed details about its upcoming premium mainboards based on the Intel Z170 core-logic designed for the Intel’s “Skylake” microprocessors. As expected, the new motherboards will provide rather extreme capabilities when it comes to overclocking, multi-GPU and high-performance storage.

Gigabyte’s premium Intel Z170-based motherboards for LGA1151 microprocessors will all support dual-channel DDR4 memory sub-system, 2-way/3-way/4-way multi-GPU, one or more M.2 slots for solid-state drives with 32Gb/s (4GB/s) maximum bandwidth, one or more SATA Express connectors with 16Gb/s transfer rate, NVMe protocol, Qualcomm Atheros Killer E2200 network controller (G1 Gaming-branded only), Intel “Alpine Ridge” controller for Thunderbolt 3 (40Gb/s) and USB 3.1 (10Gb/s) with type-C receptacle, HDMI 2.0 outputs and advanced 7.1-channel audio.

gigabyte_z170_intel_lga1151

The top-of-the-range Gigabyte GA-Z170X-Gaming G1 mainboard features multi-phase all-digital voltage regulation module (VRM) for CPUs, four PCI Express x16 slots for graphics cards and solid-state drives (shielded for maximum reliability and piece of mind), two M.2 32Gb/s slots for high-end SSDs, three SATA Express connectors with up to 16Gb/s transfer rate, Creative SoundBlaster ZxRi integrated audio, Intel “Alpine Ridge” controller for TB3 and USB 3.1, Qualcomm Atheros Killer E2200 network controller, water-cooling ready heatsink for VRM and so on.

Other Gigabyte Gaming G1 mainboards will be less expensive and will feature lower number of PCIe x16 slots, less M.2 and SATAe connectors, Creative SoundCore 3D audio and so on.

For customers with budget constraints, Gigabyte will offer GA-Z170X-UD5 TH UltraDurable-series motherboard that will feature all key premium capabilities (such as, 10-phase digital VRM, 3-way multi-GPU, M.2 32Gb/s, SATAe 16Gb/s, TB3, USB 3.1, GbE, etc.), but will come without advanced capabilities and design elements aimed at gamers and modders.

gigabyte_z170_intel_lga1151_1

Gigabyte will release its Intel Z170 mainboards with LGA1151 sockets in August or September, when Intel rolls-out its unlocked “Skylake-S” processors. Prices will be disclosed at launch.

Discuss on our Facebook page, HERE.

KitGuru Says: Gigabyte’s mainboards are traditionally very impressive. The company clearly deserves praise for using Intel’s “Alpine Ridge” controller on all premium Intel Z170 platforms. Let’s just hope that these mainboards are not too expensive because of that…

Become a Patron!

Check Also

ASRock X870E / X870 motherboards – AMD Ryzen X3D Ready

Buying a new Ryzen X3D processor ? need a new motherboard? check out these ASROCK offerings

11 comments

  1. top pcie port looks very close to the heatspreader/shield :S

  2. doloresmjackson

    ☯♫▲☑♋≈⚔89$/hour@mk1

    >

    http://www.GlobalworkTarget/ranking/homes/

  3. fccccck off pest. Nobody in the world believe your scam.

  4. The styling a bit Japanese manganese robot ish

  5. Any news about a Z170MX-GAMING 5 ?

  6. Is the Gaming G1 ATX or E-ATX???

  7. Wider than ATX still smaller than E-Atx. probably the size of current X99-G1

  8. shadowhedgehogz

    These boards look so bare compared to my x99-s board.

  9. Does anyone know if the Gaming G1 is ATX or E-ATX? I bought several Corsair Obsidian Series 650D cases, but they only hold ATX boards.

  10. Will it fit ATX mounting holes???

  11. yes, the holes are lined up for ATX form factor. its just the motherboard extends beyond those mounting points. It wont fit in cases like NZXT S430, H440 and Noctis 450 which have the motherboard tray bent for cable management.