Home / Component / CPU / ASRock E350M1 Fusion Review

ASRock E350M1 Fusion Review

We measure from a distance of around 1 meter from the chassis and 4 foot from the ground with our Extech digital sound level meter to mirror a real world situation.

KitGuru noise guide
10dBA – Normal Breathing/Rustling Leaves
20-25dBA – Whisper
30dBA – High Quality Computer fan
40dBA – A Bubbling Brook, or a Refrigerator
50dBA – Normal Conversation
60dBA – Laughter
70dBA – Vacuum Cleaner or Hairdryer
80dBA – City Traffic or a Garbage Disposal
90dBA – Motorcycle or Lawnmower
100dBA – MP3 player at maximum output
110dBA – Orchestra
120dBA – Front row rock concert/Jet Engine
130dBA – Threshold of Pain
140dBA – Military Jet take off/Gunshot (close range)
160dBA – Instant Perforation of eardrum

With only one fan in this system, noise levels are very low, under 30 dBa when watching movies. Only when pushed for a long duration does the fan spin up to a maximum of 32.3dBa. Excellent results.

Become a Patron!

Check Also

AMD Krackan Point APU appears in the Geekbench database

AMD's next-gen Ryzen AI 300 series APUs are on the horizon, and a fresh Geekbench …

8 comments

  1. I honestly feel this is the best of them all, because of the price. I also dont think many media users will care about USB 3, so I always thought it was a weird inclusion in the first place.

  2. No frills, but the price is great. ive found it for £70 in the UK, which is half the price of the asus board. Quite a saving, even if it isnt as nice.

  3. Where did you find it for that price? I cant even find Uk stock at all.

  4. Impossible to get fusion products over here. sucks.

  5. hits a good price point, but the asus board has me spoilt for choice, looks so much better with a lot more options.

  6. the passively cooled boards appeal to me more than these ones. those little fans are a failure waiting to happen

  7. The system configuration mentioned at the end uses SO-DIMM memory, even though the review says the Asrock uses normal DIMMs. And why use a 2.5″ disk when the case supports 3.5″?

  8. The SO-Dimm listed once was a typo. its regular memory used. fixed that.

    The 2.5 inch drive was used because it was handy at the time, the case certainly supports both yes, so either could be used. Some people building this system might be using a smaller chassis and a 2.5 inch drive would be viable, perhaps even an SSD for quicker boot times. I think a lot of people might have spare 2.5 inch laying around. or perhaps its just me !