Nvidia RTX 3050 Review ft. Gigabyte and Palit

1. Introduction2. Gigabyte RTX 3050 Eagle3. Palit RTX 3050 StormX OC4. Testing Methodology5. 3DMark Fire Strike & Time Spy6. Assassin's Creed Valhalla7. Cyberpunk 20778. Death Stranding9. Far Cry 610. Forza Horizon 511. Hitman 312. Horizon Zero Dawn13. Marvel's Guardians of the Galaxy14. Red Dead Redemption 215. Resident Evil Village16. Total War Saga: Troy17. Watch Dogs: Legion18. PCIe 4.0 vs PCIe 3.0 Investigation19. Performance Summary (12-Game Average)20. Ray Tracing21. The DLSS Difference22. Cost Per Frame Analysis23. Gigabyte Eagle Vs Palit StormX OC24. Clock Speed25. GPU Temperatures26. Acoustics27. Noise-Normalised Temperatures28. Power Draw: 1080p29. Power Draw: 1440p30. Performance per Watt: 1080p31. Performance per Watt: 1440p32. Total System Power Draw33. Overclocking34. Closing Thoughts35. View All Pages

We take our noise measurements with the sound meter positioned 1 foot from the graphics card. I measured the noise floor to be 32 dBA, thus anything above this level can be attributed to the graphics cards. The power supply is passive for the entire power output range we tested all graphics cards in, while all CPU and system fans were disabled. A reading under load comes from running Cyberpunk 2077 for 30 minutes.

The extra heatpipes seem to help the StormX OC run its single fan at a lower speed, too. We saw the fan hit 41%, or 1270rpm, where the Eagle ramped its fans up to 1910rpm (79%), resulting in slightly higher noise levels. Neither card is what I would describe as ‘loud', but the StormX OC is a couple of decibels quieter.

Become a Patron!