KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
On this page we present some super high resolution images of the product taken with the 24.5MP Nikon D3X camera and 24-70mm ED lens. These will take much longer to open due to the dimensions, especially on slower connections. If you use these pictures on another site or publication, please credit Kitguru.net as the owner/source.
Holy batpants batman. I almost creamed myself.
System price must be close to £5,000? crap, i feel poor now 🙁
They do make beautiful cases, but I can never afford the ones I like as they all seem to cost £300 or more.
The case seems lperfect for workstations but gamers can do better. Does LianLi have a shorter version with two front intake fans and less drive bays?
Would a side fine obstruct the airflow of this case?
Hi Luay. You mean the same case but basically just shorter in height? I dont understand your second question – whats a ‘side fine’?
Oops! That’s me typing from my iPad. Thanks for taking your time to help out!
I meant a shorter case with one less intake and less drive bays, and perhaps a side fan would make a proper gaming case. But I agree with you saying it can serve both gaming and workstation in one build. Three front intakes would probably cool even dual video cards but not optimally as a side fan would.
I can see the carefully planned airflow of this case, but would a side fan obstruct this type of air flow? I really like the build quality of this case but I also have the specific requirement I mentioned.
Thanks for the detailed review Zardon.
I was wondering… Is the drive bay on the top (Zone 1) removeable?
Hello Yume. The drive bay at the top/rear for 2.5 inch and 3.5 inch units?
the 2.5 inch bay at the top is removable as shown on this page http://www.lian-li.com/v2/en/product/product06.php?pr_index=627&cl_index=1&sc_index=25&ss_index=61&g=f but only the one at the front, not at the rear. The reason is that particular bay is the main position for hard drives so its in place with soldered bolts, rather than screws. the lower one in Zone 3 is also removable.