Home / Tech News / Announcements / Gigabyte Z68X-UD7-B3 Motherboard Review

Gigabyte Z68X-UD7-B3 Motherboard Review

Allan 'Zardon' Campbell June 24, 2011 Announcements, Motherboard

Rating: 9.0.

While everyone waits with baited breath for AMD to release their new range of processors, we felt it was a good time to have a look at another Intel Z68 motherboard – the Gigabyte Z68X-UD7-B3. Gigabyte have earned a good reputation in the industry over the years for producing quality motherboards, alongside MSI and Asus.

This year has been a great year for Intel, with the only blip on the radar being the highly publicised Cougar Point chipset SATA issues, which resulted in the B3 stepping being released to market. The P67 chipset has had to try and thrive in a market which has placed a certain stigma against it.

Enter the Z68 platform, set to give Intel a ‘fresh' start for Sandybridge. The Gigabyte Z68X-UD7-B3 is one of the flagship 1155 products from Gigabyte, created from the ground up for overclocking and high demand situations.

Specifications list:

CPU
  1. Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1155 package
  2. L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)
Chipset
  1. Intel® Z68 Express Chipset
Memory
  1. 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
    * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
  2. Dual channel memory architecture
  3. Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules

(Please refer “Memory Support List” for more information.)
Audio
  1. Realtek ALC889 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for Dolby® Home Theater
  5. Support for S/PDIF Out
LAN
  1. 2 x Realtek RTL8111E chips (10/100/1000 Mbit)
  2. Support for Teaming
  3. Support for Smart Dual LAN
Expansion Slots
  1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
    * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
  2. 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
    * The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2 slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode when the PCIEX8_1/PCIEX8_2 is populated.
  3. 1 x PCI Express x1 slot
    (All PCI Express slots conform to PCI Express 2.0 standard.)
  4. 2 x PCI slots
Multi-Graphics Technology
  1. Support for 2-Way/3-Way ATI CrossFireX™/NVIDIA SLI technology
Storage Interface Chipset:
  1. 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
  2. 4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA 3Gb/s devices
  3. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
    * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

2 x Marvell 88SE9128 chips:

  1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
  2. 2 x eSATA 6Gb/s connectors (eSATA/USB Combo) on the back panel supporting up to 2 SATA 6Gb/s devices
  3. Support for SATA RAID 0 and RAID 1
USB Chipset:
  1. Up to 8 USB 2.0/1.1 ports (4 on the back panel, including 2 eSATA/USB Combo, 4 via the USB brackets connected to the internal USB headers)

2 x Renesas D720200 chips and 2 x VLI VL810 hubs:

  1. Up to 10 USB 3.0/2.0 ports (6 on the back panel, 4 via the USB brackets connected to the internal USB headers)
    * The USB 2.0 signals of the 6 USB 3.0/2.0 ports on the back panel are from the Chipset.
IEEE 1394 T.I. TSB43AB23 chip:
  1. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 4 x SATA 6Gb/s connectors
  4. 4 x SATA 3Gb/s connectors
  5. 1 x CPU fan header
  6. 3 x system fan headers
  7. 1 x power fan header
  8. 1 x Chipset fan header
  9. 1 x front panel header
  10. 1 x front panel audio header
  11. 1 x S/PDIF Out header
  12. 2 x USB 2.0/1.1 headers
  13. 2 x USB 3.0/2.0 headers
  14. 1 x IEEE 1394a header
  15. 1 x clearing CMOS button
  16. 1 x power button
  17. 1 x reset button
Back Panel Connectors
  1. 1 x PS/2 keyboard/mouse port
  2. 1 x optical S/PDIF Out connector
  3. 1 x coaxial S/PDIF Out connector
  4. 2 x IEEE 1394a ports
  5. 2 x USB 2.0/1.1 ports
  6. 6 x USB 3.0/2.0 ports
  7. 2 x eSATA/USB Combo connectors
  8. 2 x RJ-45 ports
  9. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
  1. iTE IT8728 chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System temperature detection
  3. CPU/System/Power fan speed detection
  4. CPU overheating warning
  5. CPU/System/Power fan fail warning
  6. CPU/System fan speed control
    * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
  1. 2 x 32 Mbit flash
  2. Use of licensed AWARD BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
  1. Support for @BIOS
  2. Support for Q-Flash
  3. Support for Xpress BIOS Rescue
  4. Support for Download Center
  5. Support for Xpress Install
  6. Support for Xpress Recovery2
  7. Support for EasyTune
    * Available functions in EasyTune may differ by motherboard model.
  8. Support for Dynamic Energy Saver™ 2
  9. Support for Smart 6™
  10. Support for Auto Green
  11. Support for eXtreme Hard Drive (X.H.D)
  12. Support for ON/OFF Charge
  13. Support for Cloud OC
  14. Support for Q-Share
Bundle Software
  1. Norton Internet Security (OEM version)
Operating System
  1. Support for Microsoft® Windows® 7/Vista/XP
Form Factor
  1. ATX Form Factor; 30.5cm x 24.4cm
Remark
  1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
  2. Most hardware/software vendors no longer offer support for Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.

Become a Patron!

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Tags

Check Also

ASRock X870E / X870 motherboards – AMD Ryzen X3D Ready

Buying a new Ryzen X3D processor ? need a new motherboard? check out these ASROCK offerings

4 comments

  1. Tim
    June 24, 2011 at 10:53 am

    I saw this last week online, its a rather hefty price. almost £300.

  2. Naddy
    June 24, 2011 at 10:54 am

    I always have bought GIgabyte mobos, never let me down.

  3. Joseph
    June 24, 2011 at 10:58 am

    I like it, very nice colour scheme and board layout. I think if I was spending £300 on a mobo, this would be it. I just bought a new laptop so any desktop system upgrades are for later in the year.

  4. PrinceHarry
    June 24, 2011 at 6:19 pm

    oohh pretty … GIGabyte mobo have left me down in the past, But I dont hold it against them. For £300 it wants to be real gold on there

© Copyright 2024, Kitguru.net All Rights Reserved Standard Terms